Product ID:EUTEC TINWELD I
MSDS Date:08/08/1989
FSC:3439
NIIN:00-873-1527
MSDS Number: BSFQL

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-445-1784

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9394

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15 MG/M3,DUST;9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ZINC CHLORIDE (SARA III)

CAS: 7646-85-7

RTECS: ZH1400000

OSHA PEL 1 MG/M3

ACGIH TLV: 1MG/M3/2STEL(FUME)94

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

ACGIH TLV: C 50 PPM,VAPOR; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9394

AMMONIUM CHLORIDE (SARA III)

CAS: 12125-02-9

RTECS: BP4550000

OSHA PEL 10 MG/M3

ACGIH TLV: 10 MG/M3 FUME; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:TLV 5 MG/M3 WELDING FUMES
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN IRRITATION, EYE IRRITATION.
PRIMARY HAZARD OCCURS WHEN PRODUCT IS USED IN WELDING, SOLDERING
AND FUMES AND GASES ARE RELEASED. THESE DECOMPOSITION PRODUCTS MAY
IRRITATE THE RESPIRATORY TRACT.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN IRRITATION, EYE IRRITATION, RESPIRATORY
TRACT IRRITATION.
Medical Cond Aggravated by Exposure:PREXISTING SKIN AND/OR RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE.

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM AND QUIET. GET MEDICAL ATTENTION. SKIN: WASH AFFECTED AREA
THOROUGHLY WITH SOAP AND WATER. IF IRRITATION PERSISTS, GET MEDICAL
ATTENTION. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. INGESTION: UNLIKELY ROUTE OF EXPOSURE.

Flash Point:NONFLAMMABLE
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:NONFLAMMABLE. USE MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WELDING ARC AND SPARKS AND BRAZING FLAMES CAN
IGNITE COMBUSTIBLES AND FLAMMABLES. REFER TO ANSI Z49.1 FOR FIRE
PREVENTION DURING THE USE OF WELDING, ETC.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS. METAL POWDER DUST
MAY PRESENT A FIRE OR EXPLOSION HAZARD UNDER FAVORABLE CONDTN

Spill Release Procedures:COLLECT PASTE AND HOLD FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PRODUCT IS NONHAZARDOUS AS
SHIPPED/STORED. HAZARD OCCURS WHEN PRODUCT IS USED IN
WELDING/SOLDERING/ETC.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS PER
CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND NIOSH RESPIRATOR
SELECTION.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION TO
MAINTAIN EXPOSURE LEVELS.
Protective Gloves:WELDING GLOVES
Eye Protection:SAFETY GLASSES, GOGGLES, WELDERS SHIELD
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
WELDING FUMES AND GASES CANNOT BE CLASSIFIED SIMPLY. THE COMPOSITION
AND QUANTITY OF BOTH ARE DEPENDENT ON THE METAL BEING WELDED, THE
PROCESS AND PROCEDURES AND ELECTRODES BEING USED. THE DECOMPOSITI
ON PRODUCTS GENERATED ARE DIFFERENT IN PERCENT AND FORM FROM THOSE
LISTED IN THE INGREDIENTS SECTION OF THIS MSDS.

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:NOT GIVEN
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METAL FUMES AND OXIDES, LIKELY CARBON
MONOXIDE, FLUORIDES, OXIDES OF IRON, MANGANESE, SILICON, CHROMIUM,
NICKEL, ETC.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.